archive-sg.com » SG » V » VITECTOR.SG

Total: 182

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • Sectional Door   |   Safety Switches   |   Pedestrian Door Switch (ENS-S)
    Product News Events Find a Sales Partner America English Asia English Europe English German Sectional Door Safety Switches Pedestrian Door Switch ENS S Home Sectional Door Safety Switches Sensing Edge Pre Traveling Light Barrier Photo Eyes Pedestrian Door Switch Flashing High Beam Detector Connection Set Intellectual Property Certificates Datasheet Safety Switch Catalog Features Safe Door Contact According to EN 12453 Safety Category 2 According to EN 13849 Non Tactile Sensor

    Original URL path: http://vitector.sg/en/products/VITECTOR/SafetySwitches/SafetySwitches_Pedestrian_Door_Switch_8k2_base.html (2013-01-30)
    Open archived version from archive

  • OSE-C2323/2324 with 8K2 Interface
    OSE C 2323 for 230 V as well as its 24 V variant OSE C 2324 are control units of safety category level 3 according to DIN EN 12978 Both versions are suitable for the evaluation of two edges and additional safety switches while their output contacts are potential free and with max 4 Amp loads For the convenience of the users VITECTOR integrated an 8k2 interface in the new

    Original URL path: http://vitector.sg/en/NEWS/VITECTOR/2012_08_21_ProductNews_OSE-8k2_baseSub.html (2013-01-30)
    Open archived version from archive

  • Reflective Light Barrier RAY-RT
    of obstacles in the doorway The unique working principle blanks out wrong reflections based on triangulation The simultaneous detection of intensity and angle of the polarized red light determines the object distance and stops the door if a reflection from an obstacle is received Due to the 360 pivoting adjustment clamps and the compact size 25 x 28 x 80 mm the RAY RT can be mounted to the side

    Original URL path: http://vitector.sg/en/NEWS/VITECTOR/2012_07_04_ProductNews_RAY-RT_baseSub.html (2013-01-30)
    Open archived version from archive

  • Cut the Cord – Go Wireless With Radio DW
    is transmitted wirelessly to the control unit Simple Assembly The Wireless DW combines VITECTOR s known pneumatic switch with the advantages of wireless signal transmission The pneumatic switch can be installed without any special tools directly on site Installation is as easy as measuring and cutting the weather seal extrusion and connecting the switch with the built in radio transmitter to a tube in the weather seal The radio receiver

    Original URL path: http://vitector.sg/en/NEWS/VITECTOR/2012_03_15_ProductNews_Radioswitch_baseSub.html (2013-01-30)
    Open archived version from archive

  • OPTOEDGE – The Optical Sensing Edge
    the door Since the infrared light beam is reflected by the surface of the rubber profile operation of the sensing edge is not affected by bending due for instance to wind loads Major compression of the optical channel on the other hand attenuate the light so strongly that the safety edge switches off reliably Cut To Length The cut to length technology eliminates wasted time and money of improperly measured or manufactured edges The installation process is as simple as stocking a roll of rubber profile cutting it to length on site and plugging in the optical sensors The instant installation keeps customers satisfied while reducing downtime during the retrofitting process State of the art OPTOEDGE waterproof sensors eliminate the need for glue during the installation process Works When Ripped The NEMA4x rated sensors make the entire edge practically waterproof Because the sensors are unaffected by water dirt dust or grime the OPTOEDGE works even when the rugged rubber profile is ripped or torn Damaged rubber profiles do not significantly impair function Tough plastic bumpers provided in the installation kit protect the optical sensors from damage meaning that even if the rubber profile is completely destroyed sensors can be unplugged

    Original URL path: http://vitector.sg/en/NEWS/VITECTOR/2011_12_13_ProductNews_OPTOEDGE_BANNER_baseSub.html (2013-01-30)
    Open archived version from archive

  • Do It Yourself, On Any Door
    The OPTOEDGE fits all standard mounting channels for easy installation on the job site and is UL 325 2010 recognized Simply remove the old weather stripping or defective edge and install VITECTOR s OPTOEDGE using the retainer that comes in the kit or slide into virtually any existing door retaining edge OPTOEDGE works on doors up to 30 ft and continues functioning under heavy wind loads Cut to Length on Site No Glue Required The cut to length technology eliminates wasted time and money of improperly measured or manufactured edges The installation process is as simple as stocking a roll of rubber profile cutting it to length on site and plugging in the optical sensors The instant installation keeps customers satisfied while reducing downtime during the retrofitting process State of the art OPTOEDGE waterproof sensors eliminate the need for glue during the installation process Tough Design The NEMA4x rated sensors make the entire edge practically waterproof Because the sensors are unaffected by water dirt dust or grime the OPTOEDGE works even when the rugged rubber profile is ripped or torn Damaged rubber profiles do not significantly impair function Tough plastic bumpers provided in the installation kit protect the optical sensors

    Original URL path: http://vitector.sg/en/NEWS/VITECTOR/2011_12_06_ProductNews_SectionalDoors_baseSub.html (2013-01-30)
    Open archived version from archive

  • Safety for thick door panels, OPTOCHAIN DUO
    door panels with thickness up to 80 mm To meet the current safety standards it is essential to have two safety edges OPTOCHAIN DUO is a very easy solution to apply two safety edges on one door panel Technology The two sensors are directly connected to each other as you can see in the picture Only one cable is needed to connect both safety edges to the door control panel

    Original URL path: http://vitector.sg/en/NEWS/VITECTOR/2011_09_30_ProductNews_optochain-duo_baseSub.html (2013-01-30)
    Open archived version from archive

  • Daisy chain OSE „OPTOCHAIN“
    known optical safety edge OPTOEDGE It was developed as safety edge for doors and industrial applications with more than one safety edge The OPTOCHAIN is a standard optical safety edge but with an additional wire This additional wire is needed to pass the information from one safety edge to the next one You only have to connect the last safety edge with the standard three wire interface to the door

    Original URL path: http://vitector.sg/en/NEWS/VITECTOR/2011_08_09_ProductNews_OPTOCHAIN_baseSub.html (2013-01-30)
    Open archived version from archive