archive-sg.com » SG » F » FSE.COM.SG

Total: 84

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • Products Portfolio - Surge Protectors / Arresters
    1 35 kV or less Casing NEMA IP20 DIN KS rail mounting wall mounting Basis on ANSI IEEE CATEGORY A C UL CE CSA safety standards regulations PSP RP Power Arrester Protection of measuring environment and instruments from Surge or Lightning induced by AC Power Supply lines 2 stage surge protect noise filtering EMI RFI Wire connection parallel single phase two wire system LED indication on Power On Off and Operation States Nominal voltage 110V 220V AC Rated voltage 150V 275V AC Total discharge current 75KA 120KA 150KA Voltage protection level Alarm contact operating voltage 250V AC 124V DC IP Code IP20 NEMA Casing Steel Rail mounting type UL CE CSA safety standards regulations SHN ARR Signal Arrester Protection for electronic components in DC signal wiring Protecting the equipment from any damage caused by lightning surges 2 stage protection function Surge supressed voltage under 43 Vpk Inputs DC signal 4 to 20mA Discharge between lines 28V to 30 V or more 68V to 70V or more Voltage between lines and GND 255V to 345V Clamping voltage rating 40V or less 80V or less Response time 0 1usec or less Discharge current 3KA 8X20 µsec Max load current 100mA Wall mounting

    Original URL path: http://www.fse.com.sg/4-8-4.html (2014-06-18)
    Open archived version from archive

  • Products Portfolio - Accessories
    Features Solid State Relay SSR 1 and 3 phase SSR up to 530V AC 125A Zero voltage switch Voltage drop at Imax 1 6V Full isolation Input output Isolated case UL and CSA certification Features Heat Sinks Aluminium heat sink black anodized DIN rail mounting RLY5 Solid State Power Unit Solid state relay which can switch load currents up to 45 Amperes 240 VAC Interfaces directly with a SSR drive module Input and output terminals are isolated from each other to eliminate ground loops and noise problems Switches up to 45 Amperes 240 VAC Low level DC input control signal 3 to 32 VDC Optically isolated output 50 to 280 VAC 45 A Zero Voltage Turn on Zero Current Turn off for Reduced RFI Built in internal snubbers Supplied with high efficiency heatsink for superior thermal and surge current ratings RLY6 Single Phase DIN Rail Mount Solid State Relay Single phase solid state relay that switches load currents up to 25 A RLY6A000 switches load currents up to 40 A Feature of zero voltage turn on detector Controlled by logic SSR drive output or sourcing output Integrated heat sink and optically isolated 4000 Volt Output rating 25 A for RLY6

    Original URL path: http://www.fse.com.sg/4-8-5.html (2014-06-18)
    Open archived version from archive

  • Products Portfolio - Timers
    inputs Four setpoint alarm outputs with optional card Communications and Bus capabilities with optional card Dimension 50 mm x 97 mm Protection NEMA 4X IP65 Available options PAXCDC communication card PAXCDS setpoint card C48T 1 16 DIN Timer 7 segment 2 Line 6 digit LCD display 85 to 250 VAC or 11 to 36 VDC supply voltage Analog signal inputs SSR and relay outputs Programmable function Keys User inputs RS485

    Original URL path: http://www.fse.com.sg/4-9-1.html (2014-06-18)
    Open archived version from archive

  • Products Portfolio - Hour Meters & Counters
    UL recognized CE compliant Model 710 Electromechanical Hour Meter AC hour meters and minute meter 5 figure reset or 6 figure non reset versions available 24 115 or 230VAC power supply Panel mounting Panel cutout 2 21 Dia UL CSA recognized CE compliant Accessories Mounting bracket Splash proof kit Heavy duty splash proof kit Gasket Model 722 Totally Sealed AC Hour Meter Quartz time based AC hour meter 6 figure Non reset Totally sealed hour meter 90 to 240VAC 50 60 Hz power supply Clip or mounting holes UL CSA recognized CE compliant Accessories 3 hole mount gasket kit for NEMA 4X 12 rating Model 732 Totally Sealed DC Hour Meter Quartz accuracy DC hour meter 6 figure Non reset Totally sealed hour meter 10 to 80VDC power supply Clip or mounting holes UL CSA recognized CE compliant Accessories 3 hole mount gasket kit for NEMA 4X 12 rating Model 750 Revolution Counter Completely sealed tamper resistant and maintenance free counters Adds in either direction and records revolutions miles kilometers or acres 0 19 high 7 figures Bi directional feature Options Face plate Custom calibrations PAXC 1 8 DIN Counter 6 digit 0 56 14 2 mm LED display Up to 3 count displays Programmable scale factors Programmable function keys User inputs Power supply 85 to 250 VAC for AC version 11 to 36 VDC or 24 VAC for DC version Dual count quad inputs Four setpoint alarm outputs with option card Dimension 50 mm x 97 mm Protection NEMA 4X IP65 Accessories PAXCDS setpoint option card C48C 1 16 DIN Counters Single dual or three preset version 2 Line 6 digit LCD display Bi directional and quadrature counting features Counting range Up to 11 KHz Power supplies 85 to 250 VAC or 11 to 14 VDC for AC version

    Original URL path: http://www.fse.com.sg/4-9-2.html (2014-06-18)
    Open archived version from archive

  • Products Portfolio - Totalizers
    key reset Internal lithium battery powered Counting speed 0 to 40 counts second Operates at 6 to 240 VAC or VDC Base or panel mounting SHN 2700 2800 Totalizer Measurement for the wide range of flow applications High accuracy and Flexibility Total and Rate Display Power Supply 110 220 VAC 60 Hz 5 VA Inputs 4 20 mA 1 5V pulse Total counting digit 8 digit Rate digit 4 digit Sampling cycle 100 msec Moment flow range 9999 Max counting value 0 to 999999 Total integrate value 0 to 9999999 Outputs 4 20 mA pulse open collector 2 alarm optional Communication RS422or RS 485 optional Dimension 96x48mm Panel mounting type PAXLCR PAX lite Dual Counter and Rate Meter 6 digit 0 56 high red LED display Programmable scaling for count and rate Bi directional counting Up Down control Quadrature sensing up to 4 times resolution Built in batch counting capability Programmable user input Universal power supply 50 to 250 VAC or 21 6 to 250 VDC power supply Accept count and rate signal inputs Dual 5 Amp Form C relays output 24 VDC excitation voltage NEMA 4X IP65 sealed front bezel PAXI 1 8 DIN count rate panel meter Count

    Original URL path: http://www.fse.com.sg/4-9-3.html (2014-06-18)
    Open archived version from archive

  • Products Portfolio - Flow Meters
    system with two different turbine applications Modular system with check valve filter and or flow regulator Measuring substances water Metering range 1 to 80 l min H2O Max PN 10 100 bar depends on connections Max temperature 90 ºC Nominal diameter G3 8 DN 10 5 to 24 VDC sensor power supply with M12x1 4 pole NPN O C outputs Available Options Flow regulator 3 to 15 limiter flow rate 2 to 10 bar Check valve Filter 250 µm mesh size omni RRT1 for 2xNPN and PNP switch point 4 0 20mA output and graphical LCD display SteamFlo MFSF Industrial Steam Flow Meters Simple accurate meters for use in industrial steam applications Excellent energy monitor with wide flow range and small pressure drop Internal magnet to carry an external indicator in a non wetted enclosure 2 Wire transmitters for digital flow rate and total indication 8 digit LCD display Analog 4 20mA 0 to 5 VDC or 0 to 10 VDC output 10 to 30 VDC power supply Pipe sizes 1 2 to 4 female NPT optional flanges available Flow capacities Air equivalent of 10 2 thru 5750 SCFM gases Pressure rating Up to 600 psig Temperature rating Up to 315 ºC NEMA 4 IP67 or NEMA 7 enclosure Accessories Pressure gauges installed on the meter Two wire transmitters digital displays GearFlo PDTX4 Four Wire Meter Mounted Flow Transmitter 4 wire digital meter mounted digital flow transmitter Large back lighted LCD graphic display User programmable filtering and scaling provided for remote indication Flow rate total screens 15 to 24 VDC power supply 4 to 20 mA rate output and scaled pulse outputs 1 2 NPT conduit entrance connection Frequency range 0 to 4000 Hz Temperature rating 20 to 60 ºC HART communication protocol Magnetically select any key functions Class I hazardous location rated enclosure GearFlo PDTX2 Two Wire Meter Mounted Flow Transmitter Digital meter mounted flow transmitter for various applications 6 Digit LCD display Flow rate total real time clock features 15 to 24 VDC power supply 4 to 20 mA rate output and scaled pulse outputs 1 2 NPT conduit entrance connection Frequency range 0 to 4000 Hz Temperature rating 20 to 60 ºC Gate time function Sleep Mode for battery conservation All functions can be magnetically operated A battery life indicator estimate 4 year life NEMA 4X enclosure Residential Commercial Water Meters No batteries or No power lines to connect Combination with a rugged compact and accurate remote counter Accurate compact and reliable outside visual readout OVR systems Register options U S Gallons cubic feet metric Pressure rating Up to 150 pisg Continuous flow rating 10 to 80 GPM Metering rating 1 4 to 160 GPM Meter pipe sizes 1 2 to 2 thread or flange Tamper proof and sealed to exclude dirt insects and moisture Meet AWWA C 700 Specifications for accuracy and capacity Accessories Electric contacting Additional wire for outside visual readout 25 supplied std Connection adapters WaterFlo H Series Hot Water Turbine Meters Metering with

    Original URL path: http://www.fse.com.sg/4-10-1.html (2014-06-18)
    Open archived version from archive

  • Products Portfolio - Flow Switches
    steel or plastic Ultradur NEMA 4 IP64 enclosure Electrical cable 6 5 2m in length Available models CFNF1 AC air flow switch CFNF2 DC air flow switch HD1K GM GK Flow Switch Spring supported piston and magnetic actuation of a reed switch High switch capability with exact setting of switch via scale gear Hermetic separation of mechanical and electrical component Measuring substances water oil aggressive liquids Max PN 200 bar Max temperature 120 C Adjustable range from 0 5 to 60 l min G1 4 to G1 female thread brass stainless steel Protection IP65 Switch head ATEX and local display units available HD2K GM GK Flow Switch Spring supported piston and magnetic actuation of a reed switch High switch capability with exact setting of switch via scale gear Hermetic separation of mechanical and electrical component Measuring substances water oil aggressive liquids Max PN 200 bar Max temperature 120 C Adjustable range from 0 5 to 60 l min G1 4 to G1 female thread brass stainless steel Viscosity compensation 30 330mm² s Protection IP65 Switch head ATEX local display units available MR1K GM GK Flow Switch Mechanical Flow Switch for liquids or gaseous media Spring supported piston and magnetic actuation of a reed switch Hermetic separation of mechanical and electrical component Measuring substances water oil gas air aggressive liquids Max PN 200 bar Max temperature 120 C Adjustable range from 0 4 to 60 l min H2O G1 4 to G1 DN8 to DN 25 female thread Robust design in Brass Stainless Steel material Protection IP65 Available Models MR1KO flow switch with lateral flow metering MR1KJ flow switch with magnetic indication 10 100 FF GR Flow Switch Mechanical Flow Switch for liquids or gaseous media Spring supported piston and magnetic triggering of a reed switch Piston valve design flow switch

    Original URL path: http://www.fse.com.sg/4-10-2.html (2014-06-18)
    Open archived version from archive

  • Products Portfolio - Flow Regulators
    Regulating range from 1 to 30 l min H2O Max PN 200 bar Max temperature 300 C G1 2 to G1 DN 15 to DN 25 female thread Brass or stainless steel design WM GM Flow Regulator Mechanical Flow Regulator Consists of a star shaped stainless steel diaphram which is pressed into a metal funnel component according to flow proportional differential pressure No wear parts no additional power supply Measuring

    Original URL path: http://www.fse.com.sg/4-10-3.html (2014-06-18)
    Open archived version from archive